pflanzen sprießen aus der erde

SYMplus™ CNC-software.

Success and growth -

CNC software for training

Reaching the learning goal quickly and efficiently in 2020

It is not easy to successfully complete the IHK final examination as a cutting machine operator in turning or cutting machine operator in milling. In order to support you in this process, we have developed a special PAL software at SYMplus™. Here the focus is on practical exercises in order to achieve the greatest possible learning success.

Reviews from Teachers and Trainers

Praises for our PAL software

»”The basics of CNC technology can be excellently practiced and deepened in the PAL simulator. If you also use the accompanying workbooks, success is pre-programmed. A transfer to other controls is no problem for the students. Finding the coordinates from drawings is also practiced so extensively that the students rarely have problems determining them from drawings afterwards.«

Carsten Pieper, Teacher at BBZ Schleswig

»”The trainees have a lot of fun and enjoyment in programming and thus a high and lasting learning effect is guaranteed. The final preparation for the exam is almost no longer a big hurdle for most of them.”«

Nico Wasserberg, Instructor in the commercial and technical area of the company Rulmeca Germany GmbH from Aschersleben

IHK final examination 2020

With our PAL software, your examinees pass more easily

Is the IHK final examination for your candidates to become a cutting machine operator for turning or cutting machine operator for milling approaching? Benefit from our PAL software SYMplus™ for your lessons. The solution offers you as a trainer or vocational school teacher valuable support. Based on an established pedagogical concept, our PAL simulation enables a practical approach to PAL exercises specially designed for the exam. This way, your examinees learn quickly, sustainably and successfully.

Learning with our software
for the IHK final examination 2020

You and your examinees benefit from flexibility and practical exercises: With our PAL software SYMplus™ you seamlessly combine theoretical knowledge with practical PAL exercises. Our experience and the feedback of our customers has shown for years that through this approach, vocational students learn more successfully for the IHK final examination. With our PAL simulation, however, your examinees can learn for more than just the IHK final examination. The solution allows them to internalize important CNC basics with which they are ideally prepared for everyday work. Because with our PAL simulation, you learn not only for the exam but also for your job. Would you like to learn more or test our software yourself? Then it is best to start an enquiry for our PAL training software right away to get a license for SYMplus™.

Five reasons for using our PAL software:

  • Your students benefit from minimal learning effort with maximum success
  • Our software gives your examinees concrete PAL exercises
  • The theoretical PAL program of our software can also be simulated on a real machine
  • In only 1 ½ days our training courses make your examinee fit for the IHK final examination
  • Special task books complement our PAL software
  • Also prepares your examinees for other forms of examination in the field of CNC software

Our PAL training 2020
offers the theoretical foundation

With our PAL training courses in 2020 your students will experience an even steeper learning curve. For example, they will learn the common tasks of the PAL exams, solve gap tasks and master the first steps in CNC programming. The exam is coming up soon? Then our “Exam Preparation PAL” is just right for you. You can find further information on our overview page of our PAL training courses.

Using our PAL software
also learn CNC controls

Our PAL software offers excellent training possibilities that go beyond the pure PAL simulation. Thus, your students will quickly and easily learn the practical handling of a whole range of different CNC control software. This includes, for example, solutions from suppliers such as Siemens and Heidenhain, who are widely used in the market. Do you have questions about our training software? Then please contact us now.

Practical for the PAL exam

Learning with our PAL software for the IHK final examination

Are you about to take the PAL examination or the IHK final examination to become a cutting machine operator turning or cutting machine operator milling? Then we would like to support you so that you can master these without any problems. But don’t worry, our successful concept is not based on a flood of leaflets, complicated teaching material or lengthy training dates. You can benefit from our PAL software, which has been tried and tested over many years and which we have developed specifically for training purposes and for the implementation of practical PAL exercises. So you can prepare yourself ideally for the exam. Of course, we also offer you corresponding PAL training courses, which are conducted by our experienced employees.

Using our software
To learn for the IHK final examination 2020

You and your examinees benefit from flexibility and practical exercises: With our PAL software SYMplus™ you seamlessly combine theoretical knowledge with practical PAL exercises. Our experience and the feedback of our customers has shown for years that through this approach, vocational students learn more successfully for the IHK final examination. With our PAL simulation, however, your examinees can learn for more than just the IHK final examination. The solution allows them to internalize important CNC basics with which they are ideally prepared for everyday work. Because with our PAL simulation you learn not only for the exam but also for your job. Would you like to learn more or test our software yourself? Then it is best to start an enquiry for our PAL training software right away to get a license for SYMplus™.

Five reasons for using our PAL software:

  • Your students benefit from minimal learning effort with maximum success
  • Our software gives your examinees concrete PAL exercises
  • The theoretical PAL program of our software can also be simulated on a real machine
  • In only 1 ½ days our training courses make your examinee fit for the IHK final examination
  • Special task books complement our PAL software
  • Also prepares your examinees for other forms of examination in the field of CNC software

Our PAL training 2020
offers the theoretical foundations

With our PAL training courses in 2020 your students will experience an even steeper learning curve. For example, they will learn the common tasks of the PAL exams, solve gap tasks and master the first steps in CNC programming. The exam is coming up soon? Then our “Exam Preparation PAL” is just right for you. You can find further information on our overview page of our PAL training courses.

Using our PAL software
also learn CNC controls

Our PAL software offers excellent training possibilities that go beyond the pure PAL simulation. Thus, your students will quickly and easily learn the practical handling of a whole range of different CNC control software. This includes, for example, solutions from suppliers such as Siemens and Heidenhain, who are widely used in the market. Do you have questions about our training software? Then please contact us now.

Contact

Would you like more information? We look forward to hearing from you.

Klaus Reckermann
Personal information

Mr.Mrs.

Details about your company / school

Details for your personal offer

How many users should work simultaneously with SYMplus™?
For which technologies do you need SYMplus™?
Which modules of SYMplus™ interest you?
SYMplus Turning
SYMplus Milling