SYMplus™ CNC-Software.

Adaptable and flexible -

Smart control simulators
for a wide range of CNC machines

Open,flexible, adaptable!

High-performance SYMplus™ control simulators for CNC machines

The intelligent control simulators in the SYMplus™ CNC software use a control-neutral interface in which most of the commands and cycles of the real control are exactly simulated.

Input dialogs and context help images are provided for all supported commands and cycles – so you can easily learn how to program the original control and check it using the modern 2D and 3D simulation graphics.

In production, the control simulators of the SYMplus™ CNC software support the manufacturing process by allowing you to post-edit and retest a post-processor generated program if necessary. This is particularly advantageous if the original control is already older, editing at the control is cumbersome and the graphics are not very meaningful.

Control simulators for CNC machines are always offered for a specific control. See below which control simulators are available in SYMplus™ CNC software:

  • PAL turning 2 axes
  • PAL milling 3 axes

For the cutting machine operators there are optional extensions to 4 axes in turning or 3+2 axes in milling:

  • PAL C/Y
  • PAL 3+2

For the occupational groups that only require basic CNC knowledge, there is the possibility of didactically reducing the number of commands:

  • DIN basic training

SYMplus™ Turning

SYMplus™ Turning supports a large number of controls as standard and is also well equipped for special controls or machines. A detailed overview of all supported controls is enclosed.

symplus turning

SYMplus™ Milling

SYMplus™ Milling supports a large number of control systems as standard and is also well equipped for special control systems or machines. A detailed overview of all supported controllers can be found enclosed.

milling machine

New here? Then become a part of the KELLER family now.