Take a look: https://youtu.be/nynhlbjqnIM Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 8 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality. This task includes: 63 roughing cutter Contour pocket cycle G34 to G39 Engraving: Numbers and […]
“Because the city of Wuppertal had no money for a CNC lathe, I asked Wuppertal’s entrepreneurs for donations […]. In the meantime, the district president threatened disciplinary proceedings – and after the campaign was successfully completed, there was even praise from them!” says Siegfried Keller, our company founder. Even before he founded R. & S. […]
Let’s kick off the new training year! The start of the new training year is just around the corner! Whether you are just starting out in the CNC world or already have experience, the KELLER.Software team wishes you a successful start! The right tool is just as important for learning as it is for the […]
Take a look: https://youtu.be/pa0OMEIlfaU Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 7 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality. This task includes: Swiveling by 45 and 90 Degrees Hexagonal Raw Part Cutter Ø63 Roughing […]
In the early days of R. & S. KELLER GmbH (now KELLER.Software), nearly 40 years ago (1986), the German and Chinese Foreign Ministers visited our company in Wuppertal. The focus: the future of CNC! In the photo: The man with the red tie is Mr. Keller, our founder. To his left stands the then German […]
Student License “DIN” or “PAL”? A question we hear from time to time. This graphic might help you make the right choice! To acquire SYMplus license: https://cnc-keller.com/buy-symplus/ What is the latest version of SYMplus? https://cnc-keller.com/symplus-support/new-features-optimizations/ What is plusCARE? https://cnc-keller.com/symplus-support/pluscare/
Take a look: https://youtu.be/2Oqes0JiCDc Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 6 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality. This task includes: Zero Offset in X and Z 10-degree Swivel 50 mm Roughing Cutter […]
In 2002, KELLER launched the ‘TECHNICplus’ mathematics software for basic vocational training. This learning software covered everything from advanced calculations and CNC mathematics to the basics of NC programming (and is still available from us today!). ‘TECHNICplus’, although primarily developed for the German training market, has also gained international recognition, as you can see from […]
Would you like to learn the CNC basics and prepare yourself for a career as a machinist? Then the “DIN” student license of our CNC training software “SYMplus” is just made for you: The “DIN” student license from SYMplus lays the foundation for your successful career as a machinist. It expands your knowledge and prepares […]
Take a look: https://youtu.be/3Z6U6kN24Qk Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 5 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality. This task includes: X-, Y- and Z-axis Swivel Lateral groove with a T-slot cutter Roughing […]