KELLER.Academy – Training: Basics of DIN/PAL programming with SYMplus™

Another successful KELLER.Academy course is behind us! On a beautiful sunny day, we had the pleasure of welcoming Stadtwerke Wuppertal, MAHLE Ventiltrieb GmbH, LEMKEN GmbH & Co. KG (location Alpen) as well as two teachers from the Friedrich-Dessauer-Schule Limburg.

Topic of the training: Basics of DIN/PAL programming with SYMplus™.

We congratulate all participants on the successful completion of the course!

Would you also like to deepen your knowledge? Discover the courses of the KELLER.Academy: https://cnc-keller.com/keller-academy/


Do you have any questions?

Our experts are at your disposal. We look forward to your inquiry!

Klaus Reckermann

    Mr.Ms.

    This might also be of interest to you

    KELLER.Academy – Rolling Bearing Specialist HWG in Renningen

    KELLER.Academy paid a visit to Renningen to conduct a customized CAD/CAM training course with a focus on turning for the team at rolling bearing specialist HWG. The goal of this visit was to prepare the employees for the daily use of our CNC software SYMplus in just one and a half days. And the results are impressive!

    The training also included optimising the CAD data by integrating the design and testing a program (see photo) on the control.

    A big thank you to the HWG team for their trust in our expertise and their hospitality!

    Would you also like to deepen your knowledge? Discover the courses of the KELLER.Academy, here: https://cnc-keller.com/keller-academy/


    Do you have any questions?

    Our experts are at your disposal. We look forward to your inquiry!

    Klaus Reckermann

      Mr.Ms.

      This might also be of interest to you

      KELLER.Academy – Course: Basics of DIN/PAL programming with SYMplus™

      A successful start to 2024 at the KELLER.Academy! This time we had the pleasure of welcoming two employees from Excelitas Technologies in Göttingen to Wuppertal.

      Over the course of 1.5 days, they dealt intensively with the basics of DIN/PAL programming with SYMplus™. Congratulations to the participants on passing the course!

      Would you also like to deepen your knowledge? Discover the courses of the KELLER.Academy, here: https://cnc-keller.com/keller-academy/


      Do you have any questions?

      Our experts are at your disposal. We look forward to your inquiry!

      Klaus Reckermann

        Mr.Ms.

        This might also be of interest to you

        KELLER.Academy – Private course with a CarboTech trainee

        An inspiring example of how targeted support can pave the way for a successful professional future!

        A trainee from CarboTech Group had missed a few lessons due to illness, so his employer sent him to us at the KELLER.Academy. Thanks to a private course, he can now continue his training with confidence and nothing stands in the way of a successful exam!

        Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/


        Do you have any questions?

        Our experts are at your disposal. We look forward to your inquiry!

        Klaus Reckermann

          Mr.Ms.

          This might also be of interest to you

          Training with KELLER.Software

          Prepare yourself thoroughly for your PAL exam! With our CNC learning software SYMplus™, preparing for the IHK final examination for cutting machine operators (turning/milling) is as easy as child's play.…

          Throwback 2014 - Foosball

          In the picture you can see an exciting game of foosball between Mr. Reckermann, our sales manager, and Mr. Nouwan, our valued and long-standing partner from Belgium. The foosball table is located at…

          KELLER.Academy – Course: Driven tools, level swivel and reform PAL2020

          And the time has come again: The last KELLER.Academy course of 2023 is behind us, and the Academy is heading into a well-deserved winter break. But don’t worry, the first course of the new year on “Basics of graphical programming (CAD/CAM) with SYMplus™” will kick off on January 11–12, 2024.

          It was truly a fantastic conclusion! For the third time this year, we had the pleasure of welcoming the dedicated teachers from BK Hattingen. We were equally delighted by the visit from representatives of the Oberlin Berufsbildungswerks and Bilstein & Siekermann GmbH & Co.KG.

          Congratulations to all the participants for successfully completing the KELLER.Academy course “Driven tools, level swivel and reform PAL2020,” and have a wonderful holiday season. See you next year!

          Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/


          Do you have any questions?

          Our experts are at your disposal. We look forward to your inquiry!

          Klaus Reckermann

            Mr.Ms.

            This might also be of interest to you

            Newsletter March 2024

            Enhance Your CNC Daily Operations: Updates and Practical Tips for SYMplus™. We are delighted to bring to you the latest edition of the KELLER newsletter, designed to provide you with valuable insights…

            KELLER.Academy – Exam preparation PAL with Hager Group Apprentices

            The annual tradition continues: Hager Group trainees were once again our guests at the KELLER.Academy. Over the course of 1.5 days, they prepared intensively for their exams, closed gaps in their knowledge and clarified open questions in order to be as well-prepared as possible.

            The entire KELLER.Software team wishes them all the best for their upcoming exams!

            Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/


            Do you have any questions?

            Our experts are at your disposal. We look forward to your inquiry!

            Klaus Reckermann

              Mr.Ms.

              This might also be of interest to you

              KELLER.Academy – training, Basics of graphical programming (CAD/CAM) with SYMplus™

              What an incredible training session it was! Last week, CNC trainers and teachers came together at KELLER.Academy to learn the basics of Graphic Programming (CAD/CAM) with SYMplus™.

              A big shoutout to Bosch Rexroth, Würz & Gysler Maschinenbau GmbH, and Berufskolleg Hattingen for visiting us!

              The KELLER.Software team warmly congratulates all the participants on successfully completing the course and eagerly looks forward to our next meeting! See you soon!

              Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/


              Do you have any questions?

              Our experts are at your disposal. We look forward to your inquiry!

              Klaus Reckermann

                Mr.Ms.

                This might also be of interest to you

                KELLER.Academy – training, Basic DIN/PAL programming with SYMplus™

                Congratulations and hats off to our neighbours from Wuppertal, KNIPEX, and the Marbach Werkzeugbau GmbH from Heilbronn! They’ve successfully completed our intensive ‘Basics DIN/PAL Programming with SYMplus™’ course at KELLER.Academy, and we couldn’t be prouder! We hope to see you again at the KELLER.Academy!

                Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/


                Do you have any questions?

                Our experts are at your disposal. We look forward to your inquiry!

                Klaus Reckermann

                  Mr.Ms.

                  This might also be of interest to you

                  KELLER.Academy – course: Basic DIN/PAL programming with SYMplus™

                  Last week, in a small yet highly motivated group at KELLER.Academy, we delved into the topic of ‘Basic DIN/PAL programming with SYMplus™’.

                  Both the participants from Kolping Bildung Dortmund and BBS Cuxhaven had limited exposure to CNC programming in Milling before. But that’s precisely why they came to us.

                  The result? A major success! The enthusiasm and commitment were truly remarkable. Congratulations on passing the KELLER.Academy course!

                  Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/


                  Do you have any questions?

                  Our experts are at your disposal. We look forward to your inquiry!

                  Klaus Reckermann

                    Mr.Ms.

                    This might also be of interest to you

                    Carnival 2024

                    Helau und Alaaf! The KELLER.Software team wishes all jesters and revellers a fantastic carnival full of fun, merriment, and of course, plenty of candy! The KELLER.Software team is here for you as usual…

                    KELLER.Academy – CAD/CAM training with Miler CNC-Gravuren + Zerspanung

                    An absolutely awesome takeaway from our time at the KELLER.Academy last week: ‘Reduction Nipples.’ These little but highly practical components are experts at connecting different threads. And, of course, our instructor, Mr. Reckermann, along with our training guest, Mr. Miler (from Miler CNC-Gravuren + Zerspanung), programmed these workpieces on the spot using our CNC software SYMplus™. Perfectly aligned with the course theme ‘CAD/CAM.’

                    Fun fact: Embracing the philosophy of ‘you’re never too old to learn,’ Mr. Miler invested in personal training at the age of 77. What’s more, he spilled the beans that he’s gearing up to purchase a brand-new machine. Truly inspiring!

                    Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/


                    Do you have any questions?

                    Our experts are at your disposal. We look forward to your inquiry!

                    Klaus Reckermann

                      Mr.Ms.

                      This might also be of interest to you

                      Maintenance: February 8, 2024

                      On February 8, 2024, our partner WIBU-SYSTEMS will be carrying out maintenance work from 5 p.m. to 7 p.m. What could this mean for you? During this time, it will not be possible to activate SYMplus™…