What was in the Cutting Machine Operator Exam? (Winter 2024)
What was included in the machining exam? If you took the exam or are preparing for the upcoming one, you can watch the simulations of the machined exam pieces on our YouTube channel!
Note: These videos are available in German only.
By loading the video you accept YouTube's privacy policy.
Learn more
By loading the video you accept YouTube's privacy policy.
Learn more
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Sometimes everything just goes like clockwork! The KELLER.Software team wishes you a relaxing May 1st. We are also taking a short break and will be unavailable on May 1st and 2nd – but don’t…
In this video, we guide you step by step through Task 7 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Milling Grooves on the Face – How to Get It Right with Driven Tools
By loading the video you accept YouTube's privacy policy.
Learn more
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 8 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools” could look like in reality.
This task includes:
- Milling on the face (driven tools)
- Round groove, cycle G75
- 2 rectangular pockets, concentric to the groove’s starting semicircle
- 2-sided machining
- T-slot cutter
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 6 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Happy Easter from the KELLER.Software team! 🐰 This year, we’ve wrapped up our Easter greetings a little differently: Our apprentice came up with the idea to design an Easter bunny using the geometry…
New video on YouTube: Face Milling: Drilled Hole Circle (8 Holes) with Driven Tools
By loading the video you accept YouTube's privacy policy.
Learn more
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 7 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools” could look like in reality.
This task includes:
- Roughing cycle with D-plateDrilled Hole Circle with 8 holes (face milling)
- Virtual Y-axis
- Two-sided machining
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 5 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Forgot what a specific G-code command does, or unsure how a particular cycle works? No problem! With the SYMplus™ Help Images, you can check anytime and quickly look up all the important details. …
The Countdown is on! (Cutting Machine Operator Exam Winter 2024)
Next Wednesday (December 4th), it’s time – apprentices in the metal professions will put their skills to the test!
Not quite prepared yet? No worries! With the student version of our CNC learning software (Turning/Milling) ‘SYMplus™’, you can make the most of the remaining days!
- Rent affordably (and pay via PayPal, for example)
- Simple and quick
- Flexible license duration (2 weeks – 1 year)
Make the most of the remaining time and enter the exam with confidence!
- Start now and get ready for the exam: *Click here*
The KELLER.Software team wishes you the best of luck!
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
The latest update for SYMplus™ fixes the compatibility issue with Windows 11 "24H2." SYMplus™ is now running smoothly again on this Windows version. Additionally, we've made further optimizations…
Just like a good tool or a reliable car, your CNC software needs regular maintenance to keep running smoothly in the long term. With plusCARE™, you get: ✅ Regular updates, ensuring your software…
New video on YouTube: Turning a Sleeve with Rectangular Cutouts, C+Y Axis
By loading the video you accept YouTube's privacy policy.
Learn more
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 6 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools” could look like in reality.
This task includes:
- Plan turning, drilling, roughing, finishing
- Grooving G86
- Rectangular pocket cycle G72 with program part repetition
- Milling on a chord face (G15 G19 IP3)
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 4 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Last week, Mr. Däschlein from Robert-Limpert-Berufsschule Ansbach (Bavaria) had the unique opportunity to complete the course “Basic DIN/PAL programming with SYMplus™” as a one-on-one training…
CNC training at the Technikzentrum Peter Ulderup, BZZ Ulderup (KELLER.Academy)
Milling, turning, and graphical programming (CAD/CAM) with SYMplus™: The KELLER.Academy visited the “Technikzentrum Peter Ulderup” at BBZ Ulderup in Diepholz (Germany). One and a half days packed with CNC action: Whether beginners, returning learners, or seasoned pros – every participant gained valuable insights. From the PAL-based basics to insider tips and an introduction to 3+2-axis programming according to PAL, featuring machine-fixed and relative angles, and topped off with 3-point and vector programming.
A huge thank you to BBZ Ulderup for the inspiring atmosphere, the excellent catering, and the flawless organization!
Interested in further training?
- Find all the details about the KELLER.Academy here: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 2 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Stuck with a tricky machining job and no solution in sight? One of our customers recently faced the same challenge… ❓The Problem: Their CNC control system couldn’t handle two opposing 3-start…
CNC know-how for the medical technology of tomorrow (KELLER.Academy)
CNC know-how for the medical technology of tomorrow: Thanks to the KELLER.Academy, the apprentices at hg medical GmbH had the opportunity to deepen their CNC programming skills!
In addition to basics turning with the X and Z, complex techniques with the C and Y axes, as well as tilting with spatial angles, were also covered. Finally, there was time for individual exercises tailored to the trainees’ needs.
The Head of Training Mr. Siegfried Minnich gave a positive feedback:
“Thank you for the successful programming training held at our facility!”
Our thanks go back to you – we appreciate the wonderful time and look forward to more successful trainings together!
Would you also like to take your career to the next level?
Discover the wide range of training opportunities at the KELLER.Academy now and invest in your future: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 3 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Can I use programs written with PAL G-Code directly on the CNC machine with your software? – We get asked this question quite often. Answer: Yes, you can! With SYMplus™, you can transfer your…
New video on YouTube: Key Surfaces with Driven Milling Cutter (Radial Tool) C+Y Axis
By loading the video you accept YouTube's privacy policy.
Learn more
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 5 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools” could look like in reality.
This task includes:
- Drilling Cycle G84
- Roughing Cycle G81 (with Relief G85)
- Thread Turning G31
- Driven Milling Cutter (two key surfaces with radial tool)
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Now on YouTube! 🎥🎞️🔴 In this video, we guide you step by step through Task 11 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation…
Now on YouTube! 🎥🎞️🔴 In this video, we guide you step by step through Task 6 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation…
How to: Cutting Machine Operator Exam 2024
Hey, Cutting Machine Operators Trainees! Final exam next month? These study materials will help you be well-prepared!
Watch videos instead of cramming! Our “Instant CNC” playlist provides quick explanations of CHRISTIANI exercises using CNC simulations. Perfect for quick learning!
- Playlist: Click here
Use old exams! Familiarize yourself with typical tasks with this playlist.
- Videos: Click here
PAL commands at a glance: Find all key PAL commands for turning and milling for free on our support page.
- Turning: Click here
- Milling: Click here
For the final sprint: Rent our SYMplus™ CNC learning software for an intensive crash course!
- Rent SYMplus: Click here
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
For pocket or island contours, the entire geometry often needs to be created from A to Z. But what about rotationally symmetric contours? That should be much simpler, right? With SYMplus™ CNC…
The first KELLER.Academy course of 2025 was a great success! In one and a half intense days, the participants learned all about the basics of PAL programming with SYMplus™ and were able to…
New video on YouTube: Face Bolt Circle with Virtual Y Axis, Keyway Slot, Grooving Cycle (C+Y Axis)
By loading the video you accept YouTube's privacy policy.
Learn more
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 4 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools” could look like in reality.
This task includes:
- Face Bolt Circle (Virtual Y-Axis)
- Internal/External Finishing
- Thread Undercut, Grooving Cycle G86
- Keyway Slots 10P9
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Learning like in the real Cutting Machine Operator Exam – here’s how with SYMplus™ CNC software! ✅ Create vocabulary tests and multiple-choice questions in no time. ✅ Offer exam-like…
"Ready for the island?" With SYMplus™, island, peninsula or tenons machining becomes a relaxing task – stress-free. ✅ Optimize your tool paths in no time. ✅ Machining complex geometries…