Newsletter June 2021

Become a Math Pro with TECHNICplus™ 

You have an exam coming up? Or an aptitude test? Or simply want to brush up on your math skills for everyday life?

With TECHNICplus™, the KELLER Math Software, all this is possible:

Learn general arithmetic, rule of three, formula conversion, Pythagoras, trigonometric functions and much more through extensive tasks. The app also offers an introduction to CNC technology.

You determine your own learning pace and can prove your acquired knowledge in tests at the end.

Turn yourself into a math pro with TECHNICplus™. Buy license here> https://www.cleverbridge.com/858/purl-cnc-keller-Katalogdeu 

 

This month we are opening a new chapter with our “KELLER.Software training initiative”. A new support for all trainees in Germany, which makes it possible to book the student license PAL for one year. We would like to remind you once again that this offer is even free of charge until 31.12.2021 (prerequisite: you have a plusCARE™ contract with us).

 

Want to learn more about it? 

You can read all about it here(Only available in German)> https://cnc-keller.de/aktuelles/achtung-ab-juni-wird-ihre-kostenlose-lizenz-abgeschaltet/

We wish you a beautiful day ahead.

                                                                                       – Your KELLER.Software-Team

 

Practical Tip: Vocabulary tests? Multiple choice tasks? This is how it works with SYMplus

If you teach DIN/PAL programming using our SYMplus™ software, you are probably familiar with the “Teacher” mode of operation, which allows you to perform gap-filling tasks in the style of the written IHK(The German Chamber of Commerce) final examinations.

But what you may not know yet is that this mode gives you many more possibilities than just using an NC program as a basis.

To learn more about this Tip of the Month, please click on the picture below: 













Much more from KELLER.Software

Upcoming Training Sessions:

01.-02. July. 2021: Basics of DIN/PAL Programming with SYMplus

15.-16. July. 2021: Driven tools, plane swing and reform PAL2020

29.-30. July. 2021: Basics of graphic programming (CAD/CAM) with SYMplus™.

Further Information> https://cnc-keller.com/keller-academy/

With our plusCARE™ contract you are always up-to-date with our products and can use them trouble-free.

Learn about all the benefits you have with a plusCARE™ contract > https://cnc-keller.com/symplus-support/pluscare/

 

 

 

To subscribe to our monthly newsletter, please use the form below. Thank you.


Do you have any questions?

Our experts are at your disposal. We look forward to your inquiry!

Klaus Reckermann


    This might also be of interest to you