We are absolutely thrilled: Within just 6 months, we’ve reached the next 1,000 followers on our KELLER YouTube channel. 2,000 people, it’s like we’re a small town full of CNC enthusiasts! THANK YOU SO MUCH! – Your KELLER.Software team Not a follower yet? You can subscribe to us on YouTube for free using the […]
Take a look: https://youtu.be/6VBNvs5sRiI Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 3 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality. This task includes: Swivel around the A axis Thread milling G88 Center hole for M24x2 […]
Summer, sun, sunshine – and the new training year for cutting machine operators is just around the corner! But what do you do as a trainer with the trainees while the trade school is closed for the vacations? Or are the trainees just starting their training? With the user-friendly SYMplus™ CNC software, your trainees can […]
Can you believe it? 2014 was actually 10 years ago! Back then we, KELLER, were at METAV in Düsseldorf. It was an unforgettable experience, full of surprises! A temporary electrical failure brought everything to a standstill, and one brave trade fair employee went on a scramble to save the day. Fortunately, everything turned out well […]
Take a look: https://youtu.be/DM2BIbqpqRg Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 2 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality. This task includes: Swivel around the B-axis: 1. Zero offset according to PAL G59 2. […]
Today is a very special #ThrowbackThursday! Our in-house application developer and support expert, Mr. Meißner, is celebrating his 5 year work anniversary this month! He has been a member of the KELLER team for a total of 8 years: first as a trainee from 2016 to 2019, then as a permanent employee. In the first […]
Take a look: https://youtu.be/GEDhyNECgcg Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 1 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality. This task includes: Polar dimensioned Arc in counterclockwise direction G13 Polar dimensioned arc in clockwise […]
In 1984, when KELLER.Software was still the publishing house ‘R. Keller’, vocational school teachers Großmann and Keller laid the foundation for our first “KELLER” software. Developed for basic CNC training, the software was called “Fear-free introduction to CNC technology”. The title was intended to indicate that learning on a PC (which was still something completely […]
Trainees and their creative solutions … you know them, right? However, creative solutions are often indispensable for cutting machine operators (and similar professions). But be careful! Even small errors can cause major damage. A crash in the CNC machine can be very expensive! That’s why our SYMplus™ CNC software allows you to practise and experiment […]
Take a look: https://youtu.be/u5ec5PD7pGw Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 15 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality. This task includes: Facing with G1 External and internal roughing with G81 External and internal finishing with G42 […]