What the 2024 Open Day at BZI Remscheid was like
Experience technology, discover education!
The Open Day at BZI Remscheid offered exciting insights into the world of (CNC) technology. At our booth, visitors had the opportunity to immerse themselves in our virtual CNC workshop with VR glasses and try out this modern learning method. Throughout the rest of the BZI premises, there were also plenty of opportunities to learn about current training positions and career prospects – two truly successful days!
A big thank you to BZI Remscheid for the fantastic event!
By loading the video you accept YouTube's privacy policy.
Learn more
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Sometimes everything just goes like clockwork! The KELLER.Software team wishes you a relaxing May 1st. We are also taking a short break and will be unavailable on May 1st and 2nd – but don’t…
In this video, we guide you step by step through Task 7 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
KELLER and HAAS on European Tour (Throwback 2005)
“I have seen the future – the best for our shared future,” wrote Mr. Peter Hall from HAAS in our guestbook on December 1, 2004. These words marked the beginning of a wonderful partnership and a joint “European Tour” from 2005 to 2006.
During this period, KELLER and HAAS travelled to Hungary, Poland, Turkey, and Slovakia (this photo is from Slovakia; Mr. Keller, our founder, is on the left, and Mr. Hall is on the right).
Discover more about our history on our website: https://cnc-keller.com/history/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 6 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Happy Easter from the KELLER.Software team! 🐰 This year, we’ve wrapped up our Easter greetings a little differently: Our apprentice came up with the idea to design an Easter bunny using the geometry…
Throwback 2014 – Foosball
In the picture you can see an exciting game of foosball between Mr. Reckermann, our sales manager, and Mr. Nouwan, our valued and long-standing partner from Belgium.
The foosball table is located at the Spectrumcollege campus in Beringen (Belgium) and the figures were created using a CNC machine.
Who wants one of these cool foosball tables?
Discover more about our history on our website: https://cnc-keller.com/history/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 5 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Forgot what a specific G-code command does, or unsure how a particular cycle works? No problem! With the SYMplus™ Help Images, you can check anytime and quickly look up all the important details. …
Throwback 2009 – “KELLER” day at DREHER Werkzeugmaschinen GmbH
In March 2009, we celebrated the “KELLER Day” in Denkingen (Baden-Württemberg) together with our sales partner, DREHER Werkzeugmaschinen GmbH. We were present there and were happy to answer visitors’ questions about our CAD/CAM systems, our partnership with HAAS and the PAL qualification program.
Of course, the practical part was not to be missed! As at numerous trade fairs, NC programs could be created live with our CNC software SYMplus™ and implemented on HAAS machines.
Discover more about our history on our website: https://cnc-keller.de/history/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
The latest update for SYMplus™ fixes the compatibility issue with Windows 11 "24H2." SYMplus™ is now running smoothly again on this Windows version. Additionally, we've made further optimizations…
Just like a good tool or a reliable car, your CNC software needs regular maintenance to keep running smoothly in the long term. With plusCARE™, you get: ✅ Regular updates, ensuring your software…
Throwback 2004 – Partnership with Haas
“I have seen the future,” wrote Mr. Peter Hall, Managing Director of Haas, almost 20 years ago, on 01/12/2004, in the KELLER guestbook. A special moment that marked the beginning of a longstanding partnership.
The production lines “CNCplus TRAINING” and “CNCplus PRODUCTION” were established shortly thereafter.
Photo (from left to right): Mr. Keller, Mr. Hall, and Mr. Keller’s daughter.
Discover more about our history on our website: https://cnc-keller.de/history/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 4 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Last week, Mr. Däschlein from Robert-Limpert-Berufsschule Ansbach (Bavaria) had the unique opportunity to complete the course “Basic DIN/PAL programming with SYMplus™” as a one-on-one training…
Partnership Hungary and Romania, FL Intercoop
Expanding horizons through international cooperation! A big thank you goes to Dr. Gyurika, with whom we are planning a joint partnership in Hungary and Romania, and to our Hungarian partner, Mr. Ficsor from FL Intercoop, for visiting us here in Wuppertal.
We had the opportunity to talk about CNC training and gain insights that allowed us to look beyond Germany.
In the photo (from left to right): Mr. Mues, Mr. Reckermann, Mr. Ficsor, Dr. Gyurika and Mr. Hanich.
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 2 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Stuck with a tricky machining job and no solution in sight? One of our customers recently faced the same challenge… ❓The Problem: Their CNC control system couldn’t handle two opposing 3-start…
Visit from China, Jining University
Last Friday, we had the pleasure of welcoming a delegation from Jining University in the Shandong province of China, led by University President Wang Qingming, here in Wuppertal.
The ‘School of Industry’ with whom we’ve already signed a letter of intent for the purchase of a SYMplus™ licence in China, was represented by Dr. Zhou Ke, the Director of the CNC department. After a delightful exchange of tea and gifts (including a book made of precious silk), they continued their journey to visit our friends at BZI Remscheid.
The KELLER.Software team cherished this valuable opportunity for cultural exchange and looks forward to deepening our collaboration!
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 3 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Can I use programs written with PAL G-Code directly on the CNC machine with your software? – We get asked this question quite often. Answer: Yes, you can! With SYMplus™, you can transfer your…
Happy (Chinese) New Year
Happy New Year, or as it is called in Chinese: Xīn nián kuài lè (新年快乐).
The 15-day Chinese New Year begins today, and it is the Year of the Rabbit. The Rabbit zodiac sign promises to bring us: Longevity, Peace and Prosperity. That does sound pretty good, doesn’t it?
We would also like to wish our long-standing partners from China, “ChinaWindow” a wonderful year ahead. Our founder, Mr. Keller and Head of Sales, Mr. Reckermann, were able to visit them in China in the past, and they were also able to visit us here in Wuppertal. We hope this new year brings more collaborations between us.
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Now on YouTube! 🎥🎞️🔴 In this video, we guide you step by step through Task 11 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation…
Now on YouTube! 🎥🎞️🔴 In this video, we guide you step by step through Task 6 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation…
Christiani Trainers’ Day 2022
Finally, the Christiani Trainers’ Day took place again! For two days, the focus in Rheine was on technical training and further education. In four different workshops the latest developments were exchanged. One of these workshops was the so-called “MakerSpace”. A specialized room where students are allowed to tinker about the technology of tomorrow. From engineering principles to the programming and robotics. Our little souvenir also comes from this “MakerSpace” (see pics). A 3 mm thin plate made of lime wood, on which the logos were engraved with laser technology. Many thanks for this and for the successful Trainer Day 2022. The KELLER.Software team is already looking forward to next year.
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
For pocket or island contours, the entire geometry often needs to be created from A to Z. But what about rotationally symmetric contours? That should be much simpler, right? With SYMplus™ CNC…
The first KELLER.Academy course of 2025 was a great success! In one and a half intense days, the participants learned all about the basics of PAL programming with SYMplus™ and were able to…
Strategy- Meeting
In this fast moving business world, continuous improvement and staying agile is essential to survive. KELLER.Software tries to live this mantra on a daily basis.
The picture given below is of the recent strategy meeting conducted in association with Ms. Eileen Oppermann & Mr. Arnd Wenzel from the firm “Easyclipr”. We learnt a lot from them and look forward to working with them in the future.
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Learning like in the real Cutting Machine Operator Exam – here’s how with SYMplus™ CNC software! ✅ Create vocabulary tests and multiple-choice questions in no time. ✅ Offer exam-like…
"Ready for the island?" With SYMplus™, island, peninsula or tenons machining becomes a relaxing task – stress-free. ✅ Optimize your tool paths in no time. ✅ Machining complex geometries…