Congratulations to Mr. René Wohlfahrt from Gemeinschafts-Lehrwerkstatt Arnsberg GmbH – Arnsberg for successfully completing our 2 day course on “Driven tools, level swivel and reform PAL2020”. Contact us to know more about our courses: https://cnc-keller.com/keller-academy/
Digital is the new Normal 2020 was entirely different from what we have experienced in the previous years. It taught us to adapt to a changed normality through learning and continuous improvement. Here is a brief look at what has changed at KELLER.Software in 2020: In the new year we will adjust our price structure […]
Forget your mouse and work more productively than ever before. The operating concept of SYMplus™ is different to what you are used to from other applications. Why it is different is explained in the following tip: SYMplus™ can be operated completely via numeric keypad. This not only allows you to control the software more efficiently […]
This time it was swivelled by 90°. This is not a particular challenge for gap inspection, but in practical implementation it is important to ensure that there is no collision with the turntable or a travel distance violation. In SYMplus™ this can be tested with different machines (from DMG, SPINNER, HAAS, HERMLE, …). This time, […]
2 days training at the Berufskolleg Erkelenz last week with teachers and trainers from the region. Regardless of whether graphically programmed or according to DIN/PAL programming, at the end of an on-site training course there is always the practical implementation on the machine if it is possible, including small post-processor adjustments if necessary.
Congratulations to Mr. Andre Börger from TS Steinfurt – Steinfurt and Mr. Sergey Koop from BORSIG Process Heat Exchanger GmbH – Gladbeck for successfully completing our 2 day course on “Basics of graphical programming (CAD/CAM) with SYMplus™”. Click on this link to learn more about our courses: https://cnc-keller.com/keller-academy/
Here is the new disinfectant dispenser set up for the visitors to KELLER Academy. Training is still carried out in the academy with protection measures in place.
Here is a question that we get asked again and again. So we thought we would post the answer once again for you. What is the difference between Simulators and Postprocessors? Here is the link: http://cnc-keller.yoursupport.de/cnc.en/entries/000536/difference-between-postprocessor-and-simulator?h=the&fbclid=IwAR3EwsZ2ugOA2WHE7GiSrX5QKErTwbb-01xm8kWxOPDuG5RtxjaIv_2fvwg