KELLER.Academy – Training at Campus Handwerk GmbH
The KELLER.Academy was on the road again. This time at Campus Handwerk GmbH. There, trainers and teachers met for three days to have their knowledge topped up by our CNC expert Mr. Reckermann. In this course, we covered the complete program of SYMplus, from DIN/PAL, including driven tools and tilting, to graphic programming. On a DMG lathe on site with SIEMENS control, one of the programs was produced during the training. You can see the manufacturing process in the video.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
By loading the video you accept YouTube's privacy policy.
Learn more
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
This video demonstrates selected machining steps from Task 10 of the Christiani exercise collection “CNC Milling Technology according to PAL2020”. We illustrate these steps using the 3D simulation…
Even trainers sometimes need training themselves. Mr. Schöntag from Motion Makers GmbH has plenty of hands-on experience at the machine, but for his role in vocational training, he wanted to gain…
Newsletter October 2022
New edition workbooks for PAL2020.
In 2 months it will be Christmas, but before we settle down comfortably on the sofa with cookies, we still have a PAL exam coming up.
To help you prepare for the exam in the best possible way, we have updated the SYMplus™ workbooks to include the PAL2020 commands and made a few other important corrections as well. The new edition with PAL2020 is now available for purchase from us. By the way, even without an exam, the workbooks are a great learning tool to learn the CNC basics with SYMplus™.
What are SYMplus™ workbooks?
Methodically interlocked with SYMplus™, the SYMplus™ workbooks are the ideal teaching material for the introduction to CNC, basic training according to DIN, preparation for the PAL exam as well as control-specific technical training and CAD/CAM. The workbooks are structured according to topics and contain tasks with increasing levels of difficulty. The workbooks are also available digitally on request.
These workbooks are available for purchase:
- SYMplus™ Turning workbook
- SYMplus™ Milling workbook
If you want to know in detail what contents can be found in the respective workbooks, take a look at the reading samples:
Workbook Samples >
Another great offer for the PAL exam preparation: The “PAL exam preparation” course from November 10 – 11, 2022 at the KELLER.Academy. For 1.5 days, it’s all about the complete PAL coding in turning and milling and we’ll go through the pitfalls of the gap check together.
Registration and further information about the courses >
We wish you a beautiful day ahead
– Your KELLER.Software Team
Much more from KELLER.Software …
Next Appointments:
10. – 11. November 2022: Exam preparation PAL
24. – 25. November 2022: Basics of DIN/PAL programming with SYMplus™
On the YouTube channel of KELLER.Software you can watch the CNC software in action on the playlist “SYMplus™ in practice”.
To subscribe to our monthly newsletter, please use the form below. Thank you.
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 12 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
Carving pumpkins? 🎃 We’d rather mill ours out of metal. The KELLER.Software team wishes you a Happy Halloween!
Training – DIN/PAL Programming
This week’s topic in KELLER.Academy was “Basics of DIN/PAL Programming with SYMplus™”. We had 5 wonderful visitors for this course – Mr. Lattwein and Mr. Riedinger from the Gewerbliche Schule Ehingen as well as Mr. Klein, Mr. Paulus and Mr. Groß from Components Ltd. & Co. KG. We hope you had fun and learned a lot in those 2 days and we look forward to your next visit.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 12 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
In the CNC world, we speak many languages: Fanuc, Siemens, Heidenhain … But no matter which control system—today, on October 3rd, the Day of German Unity, we celebrate what unites us: our shared…
KELLER.Academy Training at Firma Musashi
Greetings from Bad Sobernheim. KELLER.Academy was on site at Firma Musashi last week for a 2 day course on “Level Swivel and Driven Tools”. We visited Firma Musashi for the first time 3 years ago. It was a great pleasure for us to be able to organise another KELLER.Academy course there. In these 2 days, we programmed until our heads were spinning, even beyond the script examples and the sense of achievement was impressive. Many thanks to the three instructors Raab, Schmitt and Christmann for these intensive and creative course days.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 10 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
In our course “Basics of DIN/PAL Programming with SYMplus™”, participants spent 1.5 days writing and simulating programs, setting up tools, magazines and turrets, and creating their own gap-filling…
„¡Bienvenido a México! – Online training session
Through the online training opportunities of the KELLER.Academy, our instructor Mr. Reckermann recently took a virtual trip to Mexico to visit the company “Pressensysteme Schuler Mexico S.A. de C.V.”. This is a great way to get around the world and at the same time keep our ecological footprint small. In addition, it saves an enormous amount of time and money. We look forward to doing this again and we would also like to thank you for forwarding these photos to us. – ¡Muchas gracias!
Would you like to learn more about the courses offered at the KELLER.Academy? Here is the link: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 14 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
In this video, we guide you step by step through Task 9 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Newsletter July 2022
There is a reason to celebrate: The KELLER. Academy is now 5 years old!
In 2017, people with an inquisitive mind arrived at the Academy for the very first time. Among the first to arrive were companies such as Bosch, Hansgrohe, and Continental. In the years since, the KELLER.Academy has “moved” from the Black Forest to Berlin and sometimes even beyond. Just the other day, there was an online training course in far-off Pakistan.
And every single course was and is a real source of delight for us. The KELLER.Software team would like to sincerely thank you for this.
5 years later , the same idea:
To this day, the idea behind the KELLER. Academy is that it offers you more than simple training. Trainees, beginners or professionals come together at the Academy for two days and polish up their knowledge on all aspects of SYMplus™.
The courses occur in small individual groups with a delicious lunch from a local eatery along with lots of tips and tricks. Nowadays, a course can also be conducted online according to your preference.
In which direction will the Academy evolve?
The last few years in particular have shown that online courses are becoming more and more important. VR technology and other similar technologies are gaining ground.
At KELLER.Academy, too, modern technology is already being used. If you come to us in Wuppertal, you can experience the Virtual Workshop through Virtual Reality glasses. The KELLER.Software team is looking forward to the next 5 years.
Have you already attended a KELLER.Academy course? If so, tell us about your experience by email or phone.
What did you particularly like and what would you like to see in an Academy course in the future? Perhaps a specific topic you would like to learn about in relation to SYMplus™ and CNC? We look forward to your response.
We wish you a beautiful day ahead
– Your KELLER.Software Team
Much more from KELLER.Academy…
Next Appointments:
11.- 12. August 2022: Basic DIN/PAL programming with SYMplus™
25.- 26. August 2022: Driven tools, level swivel and reform PAL2020
Further Information > https://cnc-keller.com/keller-academy/
5 years of KELLER.Academy with so many great visitors and many wonderful memories!
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Work experience instead of making coffee! At KELLER, interns are given real responsibilities from day one. That was also the case for Mr. Born, who – during his two-week internship in application…
In our 1.5-day KELLER.Academy course, Mr. Ambrosy from Mager GmbH (a manufacturer of screws and turned parts) successfully completed the introduction to graphical programming with SYMplus™. The…
KELLER.Academy in Norderstedt
That’s the way it has to be! 3 days of KELLER.Academy and heads were spinning! With a lot of fun, but great benefits, it was all about our CNC software SYMplus™ at the BBZ Norderstedt. On the third day, the group dwindled down to the “hard core” of three teachers who work with metal-cutting machine operator classes.
The KELLER.Software team would like to express their sincere thanks to the participants as well as for the hospitality. It was a pleasure to welcome such long-time and good customers to the KELLER.Academy.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 9 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
In this video, we guide you step by step through Task 11 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
KELLER.Academy Online
This week KELLER.Academy was back online. We congratulate Mr. Haesler from MAHLE GmbH in Rottweil for successfully completing the 2 day course on the basics of graphical programming (CAD/CAM) with SYMplus™.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 8 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
28 to 30 °C in the workshop? High humidity from evaporating coolant? Welcome to CNC summer. How hot is it where you are? A) Over 30 °C – I’m officially done for B) 28–30 °C –…
KELLER.Academy – PAL2020
Last week KELLER.Academy had visitors. The course topic was: Driven Tools, Level Swivel and Reform PAL2020. The KELLER.Software team congratulates Mr. Voges and Mr. Gebken from BBS Meppen on their successfully passed 2-day KELLER.Academy course.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
For the second time, we had the pleasure of welcoming Mr. Grodfeld from Röhm GmbH. After attending our CAD/CAM course, he now took part in the “Basics of DIN/PAL Programming with SYMplus™”…
Shutdown for the long weekend – holiday mode is now activated on our side! Tomorrow, June 19th, is a public holiday in Germany (Feast of Corpus Christi), so our office will be closed on that day…
Training – From Germany to Pakistan
5,527 kms – that’s the distance between Germany and Pakistan. This week, at KELLER.Academy, we brought these two countries together virtually for a one week course.
The course participants came from different cities: Islamabad, Balochistan, Hyderabad, Mughalpura, etc. They all came together for the training in Peshawar (capital of Pakistan’s Khyber Pakhtunkhwa province). This project was sponsored by GIZ, the machines were from OPTIMUM and the project was handled by Mr. Boss from E. + E. Boss GmbH from Albstadt, Germany. The KELLER.Software team would like to sincerely thank all those involved in this project.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 1 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Graphic programming made easy – with SYMplus™ and the KELLER.Academy! In a compact one-on-one training session, Mr. Grodfeld from Röhm GmbH (a leading manufacturer in methacrylate chemistry)…