Last week, the KELLER.Academy focused on DIN/PAL programming with SYMplus™. Congratulations to Mr. Schneider from Wolfgang Loch GmbH & Co. KG, as well as Mr. Harmsen-Pawils from MIELE (Lehrte plant) and Mr. Möllinghoff from BZI Remscheid on their successful completion of the course! Thank you for a great time! We hope to welcome you back […]
The KELLER.Software team wishes everyone a wonderful long Whitsun (vacation) weekend with lots of time for the family! From Tuesday, May 21, KELLER will be back for you as usual.
Take a look: https://youtu.be/9cHl-NGoXf4 Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 12 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality. This task includes: Drilling G84 Internal roughing G81 Finishing with radius correction (external and internal) Internal grooving Thread […]
In May 2001, the “Bergisches Competence Center for CNC and PLC Technology” was inaugurated at BZI Remscheid! This marked a strong partnership between KELLER, SPINNER, SIEMENS, and BZI, which provided the facilities and infrastructure (and with whom we still maintain a close friendship to this day!). Together, we introduced state-of-the-art CNC programming into various industries. […]
To all aspiring machinists and metal professionals: Good luck and lots of success for your final exams! The KELLER.Software team is keeping our fingers crossed for you!
You had planned to prepare in advance, but then you were tempted by friends, the nice weather and so on… But don’t worry, as experts in (CNC) learning, we still have an ace up our sleeve for you – a few last-minute study tips that can help you make the most of the remaining days. […]
Take a look: https://youtu.be/w-V1f-eASyE Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 11 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality. This task includes: Manual reclamping (G30 Q1) Planning, roughing, finishing Stepped shaft Thread with undercut Interested to […]
Tomorrow is Father’s Day – time for moments with the family! Whether it’s a fun games evening or a relaxed outing, we always value time with our loved ones. That’s why our office will be closed over Father’s Day/Ascension Day and the following Friday. We wish you a wonderful holiday and lots of fun in […]
The countdown is on! But don’t worry, there’s still plenty of time to learn … for instance with SYMplus™ – the super straightforward CNC learning software from KELLER. Simply rent it. Simply learn. And pass your final machinist exam next week with flying colors. Rent SYMplus™ now: https://cnc-keller.com/buy-symplus/#simplus-mieten
Take a look: https://youtu.be/93D-CfTPq3g Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 10 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality. This task includes: Finishing Drilling cycle Thread Radial grooving Axial grooving Interested to see it? Click on […]