Entries by Vera Mues

Ready for the CNC Programming with KELLER.Academy!

In just one and a half days, the participants dived deep into the fundamentals of CNC (PAL) programming with SYMplus™ – gaining valuable knowledge to apply in their teaching/work routines. Thank you for your active participation and the insightful exchanges! Course participants: 🔹 Gutmann GmbH 🔹 Paul-Weber-Schule (Vocational Training Center Homburg)

Mill a Star-Shaped Contour with G2/G3 + Ball End Mill (Video)

In this video, we guide you step by step through Task 8 from the Christiani task collection “CNC Milling Technology according to PAL2020”. Thanks to our 3D simulation in SYMplus™, everything is explained clearly and understandably. What to expect in the video: ✅ Program a star-shaped contour with G2/G3 ✅ Ball end mill/Radius mill in […]

SYMplus™ CNC software exam preparation (G-Code, Cutting Machine Operator)

If you’re serious about studying after all: SYMplus™ CNC software has you perfectly prepared! With SYMplus™, you’ll learn: 📘 NC fundamentals 📘 CNC geometry and technology 📘 CNC Programming ➡️ Including 2D/3D simulations and helpful graphics for cycles & commands Perfect for passing your final exam as a cutting machine operator (or similar professions) – […]

I’ll totally master CNC programming before the exam!

Last push before the final exam? With SYMplus™ CNC software, you’re fully prepared! Learn: 🔹 NC fundamentals 🔹 CNC geometry and technology 🔹 Programming according to PAL 2020 Perfect for passing your final exam as a machinist (or similar professions) and kickstarting your career as a CNC specialist! Rent the SYMplus™ directly and start right […]

1 May 2025 (German holiday: Labour Day)

Sometimes everything just goes like clockwork! The KELLER.Software team wishes you a relaxing May 1st. We are also taking a short break and will be unavailable on May 1st and 2nd – but don’t worry, we’ll be back with full energy and precision on Monday, May 5th. Until then, we’re dancing into May! ☀️🕺🪩🌷🌼

Straight or Arc? Milling with G1, G2, G3 (Video)

In this video, we guide you step by step through Task 7 from the Christiani task collection “CNC Milling Technology according to PAL2020”. Thanks to our 3D simulation in SYMplus™, everything is explained clearly and understandably. What to expect in the video: ✅ Outer contour with G1, G2, G3 and Cutter Compensation G41 ✅ Programming […]

Internal Thread G85 & G31 + Undercut DIN76, PAL G-Code (Video)

In this video, we guide you step by step through Task 6 from the Christiani task collection “CNC Turning Technology according to PAL2020”. Thanks to our 3D simulation in SYMplus™, everything is explained clearly and understandably. What to expect in the video: ✅ Thread programming made easy with G31 ✅ Clean undercuts with G85 – […]

Happy Easter 2025!

Happy Easter from the KELLER.Software team! 🐰 This year, we’ve wrapped up our Easter greetings a little differently: Our apprentice came up with the idea to design an Easter bunny using the geometry module of our CNC software SYMplus™ – completely self-initiated and fully programmed on their own. We were all impressed with the result […]

Cutting Threads G85 & G31 + Undercut DIN76, PAL G-Code (Video)

In this video, we guide you step by step through Task 5 from the Christiani task collection “CNC Turning Technology according to PAL2020”. Thanks to our 3D simulation in SYMplus™, everything is explained clearly and understandably. What to expect in the video: ✅ Cutting threads with G85 and G31 ✅ Undercut according to German DIN76 […]

Help Images in SYMplus™ explain CNC Commands and Cycles to you!

Forgot what a specific G-code command does, or unsure how a particular cycle works? No problem! With the SYMplus™ Help Images, you can check anytime and quickly look up all the important details. Help images are directly accessible at the command/cycle Help images provide a clear visualization, showing you what to do Help images are […]