Newsletter July 2022
There is a reason to celebrate: The KELLER. Academy is now 5 years old!
In 2017, people with an inquisitive mind arrived at the Academy for the very first time. Among the first to arrive were companies such as Bosch, Hansgrohe, and Continental. In the years since, the KELLER.Academy has “moved” from the Black Forest to Berlin and sometimes even beyond. Just the other day, there was an online training course in far-off Pakistan.
And every single course was and is a real source of delight for us. The KELLER.Software team would like to sincerely thank you for this.
5 years later , the same idea:
To this day, the idea behind the KELLER. Academy is that it offers you more than simple training. Trainees, beginners or professionals come together at the Academy for two days and polish up their knowledge on all aspects of SYMplus™.
The courses occur in small individual groups with a delicious lunch from a local eatery along with lots of tips and tricks. Nowadays, a course can also be conducted online according to your preference.
In which direction will the Academy evolve?
The last few years in particular have shown that online courses are becoming more and more important. VR technology and other similar technologies are gaining ground.
At KELLER.Academy, too, modern technology is already being used. If you come to us in Wuppertal, you can experience the Virtual Workshop through Virtual Reality glasses. The KELLER.Software team is looking forward to the next 5 years.
Have you already attended a KELLER.Academy course? If so, tell us about your experience by email or phone.
What did you particularly like and what would you like to see in an Academy course in the future? Perhaps a specific topic you would like to learn about in relation to SYMplus™ and CNC? We look forward to your response.
We wish you a beautiful day ahead
– Your KELLER.Software Team
Much more from KELLER.Academy…
Next Appointments:
11.- 12. August 2022: Basic DIN/PAL programming with SYMplus™
25.- 26. August 2022: Driven tools, level swivel and reform PAL2020
Further Information > https://cnc-keller.com/keller-academy/
5 years of KELLER.Academy with so many great visitors and many wonderful memories!
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
dormakaba Germany and Deutsche Edelstahlwerke Karrierewerkstatt at the KELLER.Academy! Both companies are currently strengthening their CNC training directly within their own operations—with…
Last week at the KELLER.Academy, participants once again spent their time programming, simulating, and discussing intensively—from the fundamentals of DIN/PAL programming to the practical…
KELLER.Academy in Norderstedt
That’s the way it has to be! 3 days of KELLER.Academy and heads were spinning! With a lot of fun, but great benefits, it was all about our CNC software SYMplus™ at the BBZ Norderstedt. On the third day, the group dwindled down to the “hard core” of three teachers who work with metal-cutting machine operator classes.
The KELLER.Software team would like to express their sincere thanks to the participants as well as for the hospitality. It was a pleasure to welcome such long-time and good customers to the KELLER.Academy.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
This video demonstrates selected machining steps from Task 13 of the Christiani exercise collection “CNC Milling Technology according to PAL2020”. We illustrate these steps using the 3D simulation…
After Mr. Schober had already attended our CAD/CAM course, we were pleased to now welcome Mr. Zaeske from Waldemar Link GmbH & Co. KG. Thank you for your visit, Mr. Zaeske. We wish you every…
KELLER.Academy Online
This week KELLER.Academy was back online. We congratulate Mr. Haesler from MAHLE GmbH in Rottweil for successfully completing the 2 day course on the basics of graphical programming (CAD/CAM) with SYMplus™.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
After a two-week break (and a successfully completed CAD/CAM course) Mr. Schober from Waldemar Link GmbH & Co. KG returned to the KELLER.Academy for the course “Basic DIN/PAL programming…
In our first course of 2026, the focus for Mr Schober from Waldemar Link GmbH & Co. KG was a hands-on introduction to the CAD/CAM workflow with SYMplus™: How do I build a geometry? Where…
KELLER.Academy – PAL2020
Last week KELLER.Academy had visitors. The course topic was: Driven Tools, Level Swivel and Reform PAL2020. The KELLER.Software team congratulates Mr. Voges and Mr. Gebken from BBS Meppen on their successfully passed 2-day KELLER.Academy course.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
This video demonstrates selected machining steps from Task 10 of the Christiani exercise collection “CNC Milling Technology according to PAL2020”. We illustrate these steps using the 3D simulation…
Even trainers sometimes need training themselves. Mr. Schöntag from Motion Makers GmbH has plenty of hands-on experience at the machine, but for his role in vocational training, he wanted to gain…
Training – From Germany to Pakistan
5,527 kms – that’s the distance between Germany and Pakistan. This week, at KELLER.Academy, we brought these two countries together virtually for a one week course.
The course participants came from different cities: Islamabad, Balochistan, Hyderabad, Mughalpura, etc. They all came together for the training in Peshawar (capital of Pakistan’s Khyber Pakhtunkhwa province). This project was sponsored by GIZ, the machines were from OPTIMUM and the project was handled by Mr. Boss from E. + E. Boss GmbH from Albstadt, Germany. The KELLER.Software team would like to sincerely thank all those involved in this project.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 12 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
Carving pumpkins? 🎃 We’d rather mill ours out of metal. The KELLER.Software team wishes you a Happy Halloween!
KELLER.Academy: DIN/PAL Programming
The KELLER.Academy took place again last week. For 2 days, the course participants dealt intensively with the topic: Basics of DIN/PAL programming with SYMplus™. For a refreshing lunch break, there was a particularly tasty (and healthy) energy boost from Lise – Das Esszimmer (see photos).
The KELLER.Software team congratulates Mr. Nahstoll from BBS Speyer, Johann-Joachim-Becher-Schule, Mr. Minnich from hg medical GmbH as well as Mr. Müller and Mr. Bendzko from Berufsbildende Schulen Mansfeld-Südharz on their successfully completed KELLER.Academy course.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.com/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 12 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
In the CNC world, we speak many languages: Fanuc, Siemens, Heidenhain … But no matter which control system—today, on October 3rd, the Day of German Unity, we celebrate what unites us: our shared…
KELLER.Academy Training
Congratulations to the trainees of “Hager Electro GmbH und Co. KG” on the successful completion of their 2-day KELLER.Academy course “Exam Preparation PAL”.
KELLER.Software team is keeping our fingers crossed for a successful exam.
Click on the following link to learn more about the courses offered at the KELLER.Academy: https://cnc-keller.de/keller-academy/
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 10 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is…
In our course “Basics of DIN/PAL Programming with SYMplus™”, participants spent 1.5 days writing and simulating programs, setting up tools, magazines and turrets, and creating their own gap-filling…