New video on YouTube: Crash prevention during 90-degree swivel (CNC Milling, 3+2 Axes)
- Take a look: https://youtu.be/Toqn2b_qMcY
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 4 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality.
This task includes:
- 90-degree swivel
- Workpiece “cuboid”
- Changed axis positions due to swiveling
- Crash risk
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
The first KELLER.Academy course of 2025 was a great success! In one and a half intense days, the participants learned all about the basics of PAL programming with SYMplus™ and were able to…
Learning like in the real Cutting Machine Operator Exam – here’s how with SYMplus™ CNC software! ✅ Create vocabulary tests and multiple-choice questions in no time. ✅ Offer exam-like…
Next Milestone Achieved: KELLER Celebrates 2,000 Followers on YouTube
We are absolutely thrilled: Within just 6 months, we’ve reached the next 1,000 followers on our KELLER YouTube channel. 2,000 people, it’s like we’re a small town full of CNC enthusiasts!
THANK YOU SO MUCH!
– Your KELLER.Software team
- Not a follower yet? You can subscribe to us on YouTube for free using the following link: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
"Ready for the island?" With SYMplus™, island, peninsula or tenons machining becomes a relaxing task – stress-free. ✅ Optimize your tool paths in no time. ✅ Machining complex geometries…
Did you know? We offer posters with all the essential CNC commands for milling and turning completely free – based on the German learning standard (PAL) – perfect for your workshop or classroom! ✅…
New video on YouTube: Swivel around A axis (rotary axis around X) + Thread milling (3+2 Axes)
- Take a look: https://youtu.be/6VBNvs5sRiI
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 3 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality.
This task includes:
- Swivel around the A axis
- Thread milling G88
- Center hole for M24x2 thread as circular pocket with Ø12 milling cutter
- Plane swivel G15
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
✅ Quick Error Correction: Mistakes can be undone instantly, saving you valuable time. ✅ Efficient Comparison of Manufacturing Strategies: Quickly find the optimal strategy for your production. ✅…
Discover our latest CNC video: Axial grooving, key surfaces and T-slot (with Driven Tools) now on YouTube! In this video, we guide you step by step through Task 10 from the Christiani task collection…
New video on YouTube: Swivel around B-axis (rotary axis around Y) 3+2 Axes
- Take a look: https://youtu.be/DM2BIbqpqRg
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 2 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality.
This task includes:
- Swivel around the B-axis:
- 1. Zero offset according to PAL G59
- 2. Rotate/pivot coordinate system according to PAL G15
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
1994 at the AMB fair: Our founder, Mr. Keller, proudly presents our in-house CNC control: CNCplus. “The latest generation of controls, complex geometries without programming,” was the slogan on…
Discover our latest CNC video: Axial grooving, key surfaces and T-slot (with Driven Tools) now on YouTube! In this video, we guide you step by step through Task 9 from the Christiani task collection…
New video on YouTube: Polar dimensioning and PAL G codes (CNC Milling, 3+2 axes)
- Take a look: https://youtu.be/GEDhyNECgcg
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 1 from Christiani’s “Collection of tasks in CNC Milling technology according to PAL2020 with Multi-Sided Machining” could look like in reality.
This task includes:
- Polar dimensioned Arc in counterclockwise direction G13
- Polar dimensioned arc in clockwise direction G12
- Polar dimensioned individual drilling positions G78
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Welcome to 2025! The KELLER.Software team wishes you a successful start to the year 2025! Thank you for your trust – we look forward to continuing to be your partner for innovative CNC solutions…
Christmas Spirit in the Finnish Grillkota! This year, we took our KELLER Christmas party to a truly special location: the Finnish Grillkota (Fyrhouse) at the “Grillakademie” in Bochum. After a cozy…
New video on YouTube: Detailed CNC machining (PAL G-Code)
- Take a look: https://youtu.be/u5ec5PD7pGw
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 15 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Facing with G1
- External and internal roughing with G81
- External and internal finishing with G42 and G41
- Thread turning with G31
- Grooving with wide and small grooving tool
- Undercutting (undercut DIN509)
- Finishing with 35° V-plate
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
What was included in the machining exam? If you took the exam or are preparing for the upcoming one, you can watch the simulations of the machined exam pieces on our YouTube channel! Note: These videos…
A long-standing friendship that connects: KELLER and the BZI Remscheid have enjoyed a close partnership for many years. One of the highlights was our joint trip to China in 2012! With the support of…
New video on YouTube: Complete CNC turning: drilling, roughing, thread cutting
- Take a look: https://youtu.be/8fthYa9h1T4
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 14 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Facing G1
- Drilling according to PAL with cycle G84
- Roughing and internal roughing with cycle G81
- External and internal finishing with G42/G41
- Thread turning according to PAL with cycle G31
- Machining the reverse side after reclamping
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
The skilled workers of tomorrow, the day after tomorrow, and beyond. 2024 – what a year! In the CNC industry, challenges are part of everyday life: every workpiece presents new tasks, and each…
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 8 from Christiani's "Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools" could look…
New video on YouTube: Steep Cone Tool Holder with integrated Pull Stud (CNC Turning)
- Take a look: https://youtu.be/ao6tjuqGYbM
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 12 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Radial Grooving Cycle G86
- Circumferential Groove
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In 2005, our CNC training software ‘SYMplus™’ was honored with the digita award at the didacta fair! The jury especially highlighted how our program seamlessly combines theory and practice in CNC…
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 7 from Christiani's "Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools" could look…
New video: Final Exam Part 2 for Machinists, Summer 2024 (Turning)
Simulation of the IHK Final Exam (Exam conducted by Chamber of Industry & Commerce, Germany) Part 2 for Machinists, Summer 2024, CNC Turning is now available on YouTube:
- Watch the video: https://youtu.be/rMk0jaUg78w
In the Turning examination task this time, all machining operations had to be carried out with driven tools on chordal surfaces (G19 IP5). In particular, gaps in the cycle calls (G7x) had to be filled, where the candidates needed to understand the axes in the G19 plane (YZ). In contrast to milling, however, it was not necessary to program entire contour trains. Instead, they were required to determine individual coordinates for the “center tolerance” and ISO fits. There were further gaps for recesses, an internal recess and jump addresses in program part repetitions.
- Interested to see more videos like this? Click on this link to visit us: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
„SYMplus™ is awesome!“ – That’s what the VW trainees wrote on our whiteboard during EMO 2001. At our booth, they showed what they were made of: live, they designed a part using our SYMplus™…
Next Wednesday (December 4th), it's time – apprentices in the metal professions will put their skills to the test! Not quite prepared yet? No worries! With the student version of our CNC learning…
New video: Final Exam Part 2 for Machinists, Summer 2024 (Milling)
Simulation of the IHK Final Exam (Exam conducted by Chamber of Industry & Commerce, Germany) Part 2 for Machinists, Summer 2024, CNC Milling is now available on YouTube:
- Watch the video: https://youtu.be/qdoeAGjywiE
The milling exam task had no major surprises: Switching on and off functions of the radius correction and the commands for soft approach and departure that have been updated since 2020, had to be mastered. Reading contour points, calculating start point coordinates, determining two fitting dimensions, calculating rotation speed and filling in gaps in the cycle for thread milling (G88) and tapping (G84).
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 6 from Christiani's "Collection of tasks in CNC Milling technology according to PAL2020 with Driven Tools" could look…
A visit rich in cultural and human connections! In January 2007, an invitation from the Salesian Order brought our sales representative to Addis Ababa, the capital of Ethiopia. The reason: Father Bergamin,…