Merry St. Nicholas’ Day!

Merry St. Nicholas’ Day!

In Germany, it is a tradition to place polished boots outside the door on the evening of December 5th. According to legend, St. Nicholas then comes by during the night and fills your boots with sweets and small gifts. 🍬

We may not have sweets for you, but we’ve got a new, interesting video on our YouTube channel!

Watch how we simulated the St. Nicholas’ house with our SYMplus™ CNC software in four different ways:

  1. G17 IP3 – End face machining with virtual Y-axis
  2. G17 IP5 – End face machining with real Y-axis
  3. G19 IP1 – Surface machining with virtual Y-axis
  4. G19 IP5 – Chord surface machining with real Y-axis

Wishing you a magical pre-Christmas season from the KELLER.Software team!

Here’s the link to the video: https://youtu.be/rO6m8pHMJMg


Do you have any questions?

Our experts are at your disposal. We look forward to your inquiry!

Klaus Reckermann

    Mr.Ms.

    This might also be of interest to you

    Last push before the PAL exam – Winter 2023

    In two days, the exams begin for the trainee cutting machine operator – three years of training, and now it’s time to show what you’ve got! The entire KELLER.Software team wishes all examinees good luck!

    On our YouTube channel, you can watch the practical exam tasks from previous years as 3D manufacturing simulations. This will give you a little insight into what to expect in the practical exam.

    Link to the playlist:

    Furthermore, on the KELLER support page, you can once again review all PAL commands (turning and milling) at a glance!

     


    Do you have any questions?

    Our experts are at your disposal. We look forward to your inquiry!

    Klaus Reckermann

      Mr.Ms.

      This might also be of interest to you

      Whitsun 2024

      The KELLER.Software team wishes everyone a wonderful long Whitsun (vacation) weekend with lots of time for the family! From Tuesday, May 21, KELLER will be back for you as usual.

      Practical tips as videos on YouTube

      Have you seen our practical tips videos on YouTube?

      Click here https://www.youtube.com/@CNCKELLERGmbH or search for “CNC KELLER GmbH” on YouTube to find us.


      Do you have any questions?

      Our experts are at your disposal. We look forward to your inquiry!

      Klaus Reckermann

        Mr.Ms.

        This might also be of interest to you

        KELLER.Software on YouTube

        Check out CNC KELLER GmbH on YouTube! Simply search the name “CNC KELLER GmbH” or enter https://www.youtube.com/@CNCKELLERGmbH in your browser window.


        Do you have any questions?

        Our experts are at your disposal. We look forward to your inquiry!

        Klaus Reckermann

          Mr.Ms.

          This might also be of interest to you

          Simulation of the IHK final examination 2020(conducted in Germany) for cutting machine operators in turning.

          Among other things, gaps in the internal thread and face grooving cycle had to be filled, and the external contour had to be programmed almost entirely by the examinee. Two wrench flats were milled with a driven tool and Y-axis.

          YouTube

          By loading the video you accept YouTube's privacy policy.
          Learn more

          Load video


          Do you have any questions?

          Our experts are at your disposal. We look forward to your inquiry!

          Klaus Reckermann

            Mr.Ms.

            This might also be of interest to you

            Father's Day 2024

            Tomorrow is Father's Day - time for moments with the family! Whether it's a fun games evening or a relaxed outing, we always value time with our loved ones. That's why our office will be closed over Father's…