New video on YouTube: Detailed CNC machining (PAL G-Code)
- Take a look: https://youtu.be/u5ec5PD7pGw
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 15 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Facing with G1
- External and internal roughing with G81
- External and internal finishing with G42 and G41
- Thread turning with G31
- Grooving with wide and small grooving tool
- Undercutting (undercut DIN509)
- Finishing with 35° V-plate
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Sometimes everything just goes like clockwork! The KELLER.Software team wishes you a relaxing May 1st. We are also taking a short break and will be unavailable on May 1st and 2nd – but don’t…
In this video, we guide you step by step through Task 7 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
New video on YouTube: Complete CNC turning: drilling, roughing, thread cutting
- Take a look: https://youtu.be/8fthYa9h1T4
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 14 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Facing G1
- Drilling according to PAL with cycle G84
- Roughing and internal roughing with cycle G81
- External and internal finishing with G42/G41
- Thread turning according to PAL with cycle G31
- Machining the reverse side after reclamping
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 6 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Happy Easter from the KELLER.Software team! 🐰 This year, we’ve wrapped up our Easter greetings a little differently: Our apprentice came up with the idea to design an Easter bunny using the geometry…
New video on YouTube: Steep Cone Tool Holder with integrated Pull Stud (CNC Turning)
- Take a look: https://youtu.be/ao6tjuqGYbM
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 12 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Radial Grooving Cycle G86
- Circumferential Groove
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 5 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Forgot what a specific G-code command does, or unsure how a particular cycle works? No problem! With the SYMplus™ Help Images, you can check anytime and quickly look up all the important details. …
New video: Final Exam Part 2 for Machinists, Summer 2024 (Turning)
Simulation of the IHK Final Exam (Exam conducted by Chamber of Industry & Commerce, Germany) Part 2 for Machinists, Summer 2024, CNC Turning is now available on YouTube:
- Watch the video: https://youtu.be/rMk0jaUg78w
In the Turning examination task this time, all machining operations had to be carried out with driven tools on chordal surfaces (G19 IP5). In particular, gaps in the cycle calls (G7x) had to be filled, where the candidates needed to understand the axes in the G19 plane (YZ). In contrast to milling, however, it was not necessary to program entire contour trains. Instead, they were required to determine individual coordinates for the “center tolerance” and ISO fits. There were further gaps for recesses, an internal recess and jump addresses in program part repetitions.
- Interested to see more videos like this? Click on this link to visit us: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
The latest update for SYMplus™ fixes the compatibility issue with Windows 11 "24H2." SYMplus™ is now running smoothly again on this Windows version. Additionally, we've made further optimizations…
Just like a good tool or a reliable car, your CNC software needs regular maintenance to keep running smoothly in the long term. With plusCARE™, you get: ✅ Regular updates, ensuring your software…
New video: Final Exam Part 2 for Machinists, Summer 2024 (Milling)
Simulation of the IHK Final Exam (Exam conducted by Chamber of Industry & Commerce, Germany) Part 2 for Machinists, Summer 2024, CNC Milling is now available on YouTube:
- Watch the video: https://youtu.be/qdoeAGjywiE
The milling exam task had no major surprises: Switching on and off functions of the radius correction and the commands for soft approach and departure that have been updated since 2020, had to be mastered. Reading contour points, calculating start point coordinates, determining two fitting dimensions, calculating rotation speed and filling in gaps in the cycle for thread milling (G88) and tapping (G84).
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 4 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Last week, Mr. Däschlein from Robert-Limpert-Berufsschule Ansbach (Bavaria) had the unique opportunity to complete the course “Basic DIN/PAL programming with SYMplus™” as a one-on-one training…
New video on YouTube: 2-sided CNC machining: radius correction, thread undercutting (DIN76), thread turning …
- Take a look: https://youtu.be/9cHl-NGoXf4
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 12 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Drilling G84
- Internal roughing G81
- Finishing with radius correction (external and internal)
- Internal grooving
- Thread undercut DIN76
- Thread turning G31
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 2 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Stuck with a tricky machining job and no solution in sight? One of our customers recently faced the same challenge… ❓The Problem: Their CNC control system couldn’t handle two opposing 3-start…
New video on YouTube: CNC turning from 2 sides
- Take a look: https://youtu.be/w-V1f-eASyE
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 11 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Manual reclamping (G30 Q1)
- Planning, roughing, finishing
- Stepped shaft
- Thread with undercut
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
In this video, we guide you step by step through Task 3 from the Christiani task collection "CNC Turning Technology according to PAL2020". Thanks to our 3D simulation in SYMplus™, everything is explained…
Can I use programs written with PAL G-Code directly on the CNC machine with your software? – We get asked this question quite often. Answer: Yes, you can! With SYMplus™, you can transfer your…
New video on YouTube: Internal Machining: Repetition of CNC Turning Cycles
- Take a look: https://youtu.be/93D-CfTPq3g
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 10 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Finishing
- Drilling cycle
- Thread
- Radial grooving
- Axial grooving
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Now on YouTube! 🎥🎞️🔴 In this video, we guide you step by step through Task 11 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation…
Now on YouTube! 🎥🎞️🔴 In this video, we guide you step by step through Task 6 from the Christiani task collection "CNC Milling Technology according to PAL2020". Thanks to our 3D simulation…
New video on YouTube: Radial grooves on the inside with axial grooves G88 (CNC turning)
- Take a look: https://youtu.be/ydTEh1e88EI
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 8 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Radial grooving cycle G86
- Axial grooving cycle G88
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
For pocket or island contours, the entire geometry often needs to be created from A to Z. But what about rotationally symmetric contours? That should be much simpler, right? With SYMplus™ CNC…
The first KELLER.Academy course of 2025 was a great success! In one and a half intense days, the participants learned all about the basics of PAL programming with SYMplus™ and were able to…
New video on YouTube: Thread Undercut/Threading Cycle (internal) DIN 76, Form C or D (CNC turning)
- Take a look: https://youtu.be/LuOWkAigHmw
Using the 3D simulation of our SYMplus™ CNC software, we will show you how task 6 from Christiani’s “Collection of tasks in CNC turning technology according to PAL2020” could look like in reality.
This task includes:
- Thread cycles and undercuts (internal) according to DIN 76, form C or D
- Interested to see it? Click on this link to watch the video: https://www.youtube.com/@CNCKELLERGmbH
Do you have any questions?
Our experts are at your disposal. We look forward to your inquiry!
This might also be of interest to you
Learning like in the real Cutting Machine Operator Exam – here’s how with SYMplus™ CNC software! ✅ Create vocabulary tests and multiple-choice questions in no time. ✅ Offer exam-like…
"Ready for the island?" With SYMplus™, island, peninsula or tenons machining becomes a relaxing task – stress-free. ✅ Optimize your tool paths in no time. ✅ Machining complex geometries…